Region

应用

PLP and PA in Human sera/plasma on Gemini-NX 3u, C18, 100x4.6 by HPLC w Fluorescence Detection

应用详细信息 (应用ID: 20684)

货号:00D-4453-E0
尺寸:100 x 4.6 mm ID
洗脱类型:Gradient
洗脱A:20mmol/L Na2HPO4 + 1mL acetic acid in 1L DI Water
洗脱B:ACN : MeOH (70:30)
梯度程序:
步骤序号 时间 (分) 图片A 图片B
1 0 95 5
2 5 40 60
3 5.1 5 95
4 6 95 5
5 7 95 5

流速 (毫升/分钟):1 mL/min
冷却温度: 35 °C
检测: Fluorescence (FLUOR) @ Ex 360 nm (22°C)
检测器信息: Shimadzu RF-20A
备注:SAMPLE PREPARATION
1. Thaw patient plasma samples and sera/plasma spiked calibrators or pre-manufactured calibration standards and controls at ambient temperature. Protect from light.
2. Pipette 400 µL of the blank (Water), calibration standards, controls and plasma specimens into the appropriate labeled 1.5 mL Eppendorf microcentrifuge tubes.
i. Briefly vortex the calibrators and controls immediately prior to sampling.
ii. Mix the plasma samples by gentle inversion immediately prior to sampling.
iii. Protect the tubes from light
3. Add 30 µL of 250 mg/mL semicarbazide/glycine solution in rapid succession into all the tubes containing samples; cap the tubes, vortex for 15 seconds.
4. Incubate in the dark at room temperature for 30 minutes.
5. Uncap the tubes; add 50 µL of 20 % meta-Phosphoric acid to the controls and patient samples.
6. Recap the tubes and vortex for 30 seconds at room temperature.
7. Centrifuge for 5 minutes at 14,000 rpm. Note: The relative centrifugal force (RCF)=16,000 g.
8. Transfer 350 µL of supernatant to a 2 mL amber vial.
9. Cover the vial with lid and place in the autosampler (RT).
10. Inject 30 µL

分析物详细信息

分析物详细信息不可用

1
Pyridoxal 5'-phosphate
search

2
4-Pyridoxic acid
search

3
Pyridoxal
search